TS rules
IF YOUR GUILD OR GAMING GROUP WOULD LIKE TO USE THIS TS. PLEASE ASK ME THROUGH THIS FORUM SECTION. I WOULD GREATLY APPRECIATE IT. EVEN THOUGH THIS TS IS FREE FOR USE, I STILL LIKE TO KNOW WHAT IS GOING ON SO I CAN MANAGE MY SIDE OF THINGS

1. Language may be foul at times. If at all there are children present and you are asked to not cuss. Please....don't cuss!

2. Channels are made specifically for what you are doing. So if say you are in a raid, get into your appropriate channel. This is to keep the TS server clean.

3. If an admin of the TS server tells you to not do something again or that your out of hand. He/She has the full rights to ban you for life from the TS server by IP address if you have been fully warned and you do not wish to listen.

4. You may invite friends to the server. It's an open server for anyones use. But, this server is password protected to keep out random outside people.

5. Last but not least! Have fun and enjoy this FREE TS server provided bywww.GeForce3d.net.


TS INFO

TS server address: 24.21.238.240:8767
TS password is: blueberry

If you can not get on, check here to see if the password has been changed.
If you are having issues with getting on to the TS server it is probably on your end since I have had this server running for over a year and have yet to have an issue on my end. Some issues may be that you can not sign in to the server at all. Some firewall software may in fact cause this issue. If you have the proper ports forwarded with your firewall protection and still can not connect. I suggest unplugging both your modem and router/s and wait at least 30 seconds. Plug in your modem first then your router/s and try again.

If for some reason you still can't get on the TS server. Your a noob. Make sure all the correct things are checked and the address is correct as well.

Directions:
1. To install this program go to http://www.goteamspeak.com/index.php?page=downloads and download the appropriate CLEINT package for the OS you are using.

2. After you have installed the software. Start it and go to the menu at the top.

3. Click on "connection" and a drop down menu will come up.

4. Next you want to click on "connect", this will bring up another section. This is where you will insert your servers info for easy connection later on.

5. In the blank white area you will see where it says "Servers", here you need to right click on "servers" and another drop down menu will appear.

6. You will see where it says "add a server", well...add a new server if you haven't figured that out on your own.

7. After that, you will need to give it a name. Once a name has been picked you will see that you have a side panel with areas you need to fill in. Like server address, nickname, username (only use the username if you are already registered and have your own personal password and username set already, other than that do not place anything here)

8. Make sure that you have "Anonymous" checked, unless you are already registered. If you are registered than you will need to click on registered and put in the appropriate info.

9. The server password will be the last thing you should have to place in there. the last 3 parts are for other uses and are obvious to what they do.


Suggestions

If you have a suggestion, please post it up!